If you plan on installing gutter guards around the roof of your home, you should keep in mind there are two options ahead of you. The more expensive option would be to hire someone else to install them for you. The second one would be to get things done yourself. Gutter guards will keep debris, leaves and more from entering your gutters and endangering their integrity. You will get a little dirty in the process, but you will save money, complete the job in a day and overall enjoy a better time.
Installing Gutter Guards
• You should begin by cleaning out your gutters completely and as thoroughly as you can. The easiest way you can do this is by using your hands. Just put some good gloves on, then climb up a sturdy ladder and do your best to remove all leaves, debris, dirt and branches you find up there. If you haven’t had any rain in a while, then you may be able to make things go faster. Use a leaf blower to blow things away from the gutters. You should collect all debris and then throw them away as is appropriate.
• Check for possible leaks in the gutters once you’ve removed all gunk, dirt and debris. Run some water through and observe how it goes, allowing water to flow through the gutter system. As time goes by they may have experienced corrosion or cracks, depending on the materials used. Take note of the areas and make sure you repair them or replace them as soon as possible.
• Measure your gutters while you’re at it. Once you’re done with the replacement or repairs, you can start measuring. Measure the length of each of the gutters and ensure you have the correct measurements written down. You will need them so you can purchase the right amount of materials when you install your gutter guards.
• Choose a gutter guard after measuring. Get to your local hardware store and look at the options available for you. Choose the one that you like best, purchase it and make sure you have enough material to cover the gutters. You could buy just a bit more material in case you make mistakes in the process just to be on the safe side.
• Start installing the gutter guards by checking out the directions from the manufacturer. This will be the easiest way you can do that without any issues. Make sure you follow the instructions closely, testing out the works to make sure you have no damage done to the gutters themselves as you do. If you do see any damage, you should make sure you fix that as soon as possible.
